Info

Welding Tips and Tricks Podcast

Welcome to the Welding Tips and Tricks Podcast brought to you by Jody Collier, Jonathan Lewis, and Roy Crumrine! We wanted to bring you a podcast talk about welding from a weldors point of view like you. Our goal is to give you, the listener, another great way to experience Welding Tips and Tricks. Listen to welding shop talk while welding, or driving home! Thanks for tuning in and enjoy the ride!
RSS Feed
Welding Tips and Tricks Podcast
2018
November
October
September
August
July
June
May
April
March
February
January


2017
December
November
October
September
August
July
June
May
April
March
February
January


2016
December
November
October
September
August
July
June


Categories

All Episodes
Archives
Categories
Now displaying: Category: general
Nov 19, 2018

Thank you for listening to episode 117 of the Welding Tips and Tricks Podcast!  This weeks episode is a Recap of Fabtech 2018.  We had a blast meeting everyone and seeing all the great things the industry had to offer.  JD Brewer joined us for this one to share his experience, too.  Fabtech is really such a great shot in the arm for keeping things going and pushing past hard times.  We hope that if you're on the fence for 2019 you join us and GO!  Have a great week everyone!  Enjoy

 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!  
 
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are Adams Industrial, Andy Katanic, Anthony Chrisomalis, Bibli, Brandon Parry, Cory Dobson, Datum.build, David Doherty, Demented Metal Werkz, Forrever Endeavors, RoboVent, H4 Fab Works, Jacob Elder, Jimi Luck, Kyle Lenker, Lick Skillet Fab, Marcus Hansen, Mike Howe, L&N Welding, Noe Sanjuan, Pick's Fab, Richard Black, Ricks Welding Service, S&S Metal Fabrication, Scott Tasso, Shane Gunnin, Smashboogie 4x4, Smith Industries, Unobtainium Welding, Veteran Welding Co, William Herman, Yusuf Khan. 
 
Welding Tips and Tricks T-Shirts  
 
Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL
 
Free Shipping within the USA 
 
Outside the USA please contact us and we'll find out the best shipping options for you..
 
NYC CNC Intro to Tig Welding Class 
 
Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.  
 
Find more information at www.learntig.com
 
Where you can find some of the things mentioned in this episode!  
 
Weldskillzkitz on Instagram
 
Where Can You Find the Welding Tips and Tricks Forum?
 
Welding Tips and Tricks Forum
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
Jonathan Lewis     http://www.superiorweldandfab.com/
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram
 
 
Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.
 
 
 
Where can you find a Tig Finger?
 
You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.
 
 
This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 
 
 
 
New music brought to you by Jody's son Jake
Nov 5, 2018

Thank you for listening to episode 116 of the Welding Tips and Tricks Podcast!  For this episode we thought it would be fun to talk about the Dreaded Spool Gun.  Roy has been working on a job for Jonathan for the past few weeks that has been nothing but Spool Gun Aluminium, so we thought the timing would be good to talk about our experiences we have with them.  What has worked and what has not.  They're not the most ideal way of welding aluminum but they really do get the job done and if you pay attention to the small details they're really not all bad.  Enjoy!

If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!  
 
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are Adams Industrial, Alex Brown, Andy Katanic, Anthony Chrisomalis, Bibli, Brandon Parry, Cory Dobson, Datum.build, David Doherty, Demented Metal Werkz, Forrever Endeavors, RoboVent, H4 Fab Works, Jacob Elder, Jimi Luck, Kyle Lenker, Lick Skillet Fab, Mike Howe, L&N Welding, Noe Sanjuan, Pick's Fab, Ricks Welding Service, S&S Metal Fabrication, Scott Tasso, Shane Gunnin, Smashboogie 4x4, Smith Industries, Unobtainium Welding, Veteran Welding Co, Yusuf Khan. 
 
Welding Tips and Tricks T-Shirts  
 
Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL
 
Free Shipping within the USA 
 
Outside the USA please contact us and we'll find out the best shipping options for you..
 
NYC CNC Intro to Tig Welding Class 
 
Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.  
 
Find more information at www.learntig.com
 
Where Can You Find the Welding Tips and Tricks Forum?
 
Welding Tips and Tricks Forum
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
Jonathan Lewis     http://www.superiorweldandfab.com/
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram
 
 
Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.
 
 
 
Where can you find a Tig Finger?
 
You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.
 
 
This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 
 
 
 
New music brought to you by Jody's son Jake
Oct 29, 2018

Thanks for listening to episode 115 of the Welding Tips and Tricks Podcast!   For this weeks topic we thought it would be fun to chat about a few of the different kinds of Super Alloys there are out there, that we know of, and how you can take the techniques welding them and apply them to more standard materials.  We hope that this episode will spark an interest in you to go do some research of your own on some different materials.  Never know when that extra information will be very handy!   

 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!  
 
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are Adams Industrial, Alex Brown, Andy Katanic, Anthony Chrisomalis, Bibli, Brandon Parry, Cory Dobson, Datum.build, David Doherty, Demented Metal Werkz, Forrever Endeavors, RoboVent, H4 Fab Works, Jacob Elder, Jimi Luck, Kyle Lenker, Lick Skillet Fab, Mike Howe, L&N Welding, Noe Sanjuan, Pick's Fab, Ricks Welding Service, S&S Metal Fabrication, Scott Tasso, Shane Gunnin, Smashboogie 4x4, Smith Industries, Unobtainium Welding, Veteran Welding Co, Yusuf Khan. 
 
Welding Tips and Tricks T-Shirts  
 
Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL
 
Free Shipping within the USA 
 
Outside the USA please contact us and we'll find out the best shipping options for you..
 
NYC CNC Intro to Tig Welding Class 
 
Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.  
 
Find more information at www.learntig.com
 
Where Can You Find the Welding Tips and Tricks Forum?
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram

 

Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.

 

Where can you find a Tig Finger?

You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.

 

This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 

 

New music brought to you by Jody's son Jake

Oct 22, 2018

Thank you for listening to episode 114 of the Welding Tips and Tricks Podcast!  For this episode we talk all about Hardfacing.  Because the three of us have very little experience with this process we reached out to Aaron Morgan from @Industrial_Ironworks to weigh in on this subject.  If you're thinking of getting into this type of work you'll really want to take some really good notes from this episode!  Aaron shared an amazing amount of information!  We hope you enjoy this episode.  

 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!  
 
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are Adams Industrial, Alex Brown, Andy Katanic, Anthony Chrisomalis, Bibli, Brandon Parry, Cory Dobson, Datum.build, David Doherty, Demented Metal Werkz, Forrever Endeavors, RoboVent, H4 Fab Works, Jacob Elder, Jimi Luck, Kyle Lenker, Lick Skillet Fab, Mike Howe, L&N Welding, Noe Sanjuan, Pick's Fab, Ricks Welding Service, S&S Metal Fabrication, Scott Tasso, Shane Gunnin, Smashboogie 4x4, Smith Industries, Unobtainium Welding, Veteran Welding Co, Yusuf Khan. 
 
Welding Tips and Tricks T-Shirts  
 
Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL
 
Free Shipping within the USA 
 
Outside the USA please contact us and we'll find out the best shipping options for you..
 
NYC CNC Intro to Tig Welding Class 
 
Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.  
 
Find more information at www.learntig.com
 
 
Where can you find Aaron?
 
 
Where Can You Find the Welding Tips and Tricks Forum?
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram

 

Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.

 

Where can you find a Tig Finger?

You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.

 

This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 

 

New music brought to you by Jody's son Jake

Oct 15, 2018

Thank you for listening to episode 113 of the Welding Tips and Tricks Podcast!  With Fabtech just around the corner we thought it would be a good time to kick off a little count down to Fabtech.  Mainly to get our minds squared away on what we would like to accomplish this year at Fabtech and make the most of our time there.  We hope that if you're attending this episode will help kick start your thoughts about your time there too!  Enjoy!

 
    If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!  
 
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are Alex Brown, Andy Katanic, Anthony Chrisomalis, Bibli, Black Sheep Fab Shop, Brandon Parry, Cory Dobson, Datum.build, David Doherty, Demented Metal Werkz, Erik Ruppel, Forrever Endeavors, RoboVent, H4 Fab Works, House of Chop, Jacob Elder, Jimi Luck, Kyle Lenker, Lick Skillet Fab, Mike Howe, Noe Sanjuan, Norse Welding, Ricks Welding Service, S&S Metal Fabrication, Scott Tasso, Shane Gunnin, Smashboogie 4x4, Smith Industries, Unobtainium Welding, Veteran Welding Co, Yusuf Khan. 
 
Welding Tips and Tricks T-Shirts  
 
Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL
 
Free Shipping within the USA 
 
Outside the USA please contact us and we'll find out the best shipping options for you..
 
NYC CNC Intro to Tig Welding Class 
 
Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.  
 
Find more information at www.learntig.com
 
 
Where Can You Find the Welding Tips and Tricks Forum?
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram

 

Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.

 

Where can you find a Tig Finger?

You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.

 

This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 

 

New music brought to you by Jody's son Jake

Oct 8, 2018

Thanks for listening to episode 112 of the Welding Tips and Tricks Podcast!  For this Topic episode we thought it would be fun to talk about a question we received in a DM.  It asked us what would be tell our younger selves about the welding world after many years of experience.  Jonathan wasn't able to join us so we reached out to ICWeld to give us his take on this topic.  We hope that if you're new to the trade that you can learn from our experience and start your path a little different, and if you've been in the game for a while take some time and think about what you'd tell yourself.  It's a fun experiment.  Enjoy!

 
  If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!  
 
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are Alex Brown, Andy Katanic, Anthony Chrisomalis, Bibli, Black Sheep Fab Shop, Brandon Parry, Cory Dobson, Datum.build, David Doherty, Demented Metal Werkz, Erik Ruppel, Forrever Endeavors, RoboVent, H4 Fab Works, House of Chop, Jacob Elder, Jimi Luck, Kyle Lenker, Lick Skillet Fab, Mike Howe, Noe Sanjuan, Norse Welding, Richard Black, Ricks Welding Service, S&S Metal Fabrication, Scott Tasso, Shane Gunnin, Smashboogie 4x4, Smith Industries, Steven Fish, Tucker, Unobtainium Welding, Veteran Welding Co, Yusuf Khan. 
 
Welding Tips and Tricks T-Shirts  
 
Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL
 
Free Shipping within the USA 
 
Outside the USA please contact us and we'll find out the best shipping options for you..
 
NYC CNC Intro to Tig Welding Class 
 
Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.  
 
Find more information at www.learntig.com
 
 
Where Can You Find the Welding Tips and Tricks Forum?
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram

 

Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.

 

Where can you find a Tig Finger?

You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.

 

This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 

 

New music brought to you by Jody's son Jake

Oct 1, 2018

Thank you for listening to episode 111 of the Welding Tips and Tricks Podcast.  For this episode we thought it would be fun to have Mike Zanconato back on after Jody spent some time up at his shop filming.  If you haven't had a chance to watch these videos on YouTube you should stop now and go check them out.  For this episode we brake down those topics, Tig welding Aluminum, Silver Brazing, and Tig welding Titanium.  This episode is filled with great information!  We hope you enjoy it!  

 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!  
 
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are Adam's Industrial, Alex Brown, Andy Katanic, Anthony Chrisomalis, Bibli, Black Sheep Fab Shop, Brandon Parry, Cory Dobson, Datum.build, David Doherty, Demented Metal Werkz, Erik Ruppel, Forrever Endeavors, RoboVent, H4 Fab Works, House of Chop, Jacob Elder, Jimi Luck, Kyle Lenker, Lick Skillet Fab, Mike Howe, Noe Sanjuan, Norse Welding, Richard Black, Ricks Welding Service, S&S Metal Fabrication, Scott Tasso, Shane Gunnin, Smashboogie 4x4, Smith Industries, Steven Fish, Tucker, Unobtainium Welding, Veteran Welding Co, Yusuf Khan. 
 
Welding Tips and Tricks T-Shirts  
 
Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL
 
Free Shipping within the USA 
 
Outside the USA please contact us and we'll find out the best shipping options for you..
 
NYC CNC Intro to Tig Welding Class 
 
Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.  
 
Find more information at www.learntig.com
 
 
Where can you find Mike Zanconato?
 
On Instagram @MZank
On the Web at www.zanconato.com
 
Where Can You Find the Welding Tips and Tricks Forum?
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram

 

Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.

 

Where can you find a Tig Finger?

You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.

 

This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 

 

New music brought to you by Jody's son Jake

Sep 24, 2018

Thanks for listening to episode 110 of the Welding Tips and Tricks Podcast!  For this episode we talk all about Marketing yourself and your Company.  In today's digital world even if you do not run your own company you're still building your own personal Brand.  We're by not means experts on this topic but we are on the same level as you so we know a lot of this will relate to your own path.  For this episode we hope that there's a few good takeaways that you can start trying to build your brand into a future empire!  Enjoy!

 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!  
 
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are Alex Brown, Andy Katanic, Anthony Chrisomalis, Bibli, Black Sheep Fab Shop, Brandon Parry, Cory Dobson, Datum.build, David Doherty, Demented Metal Werkz, Erik Ruppel, Forrever Endeavors, RoboVent, H4 Fab Works, House of Chop, Jacob Elder, Jimi Luck, Kyle Lenker, Lick Skillet Fab, Mike Howe, Noe Sanjuan, Norse Welding, Richard Black, Ricks Welding Service, S&S Metal Fabrication, Scott Tasso, Shane Gunnin, Smashboogie 4x4, Smith Industries, Steven Fish, Tucker, Unobtainium Welding, Veteran Welding Co, Yusuf Khan. 
 
Welding Tips and Tricks T-Shirts  
 
Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL
 
Free Shipping within the USA 
 
Outside the USA please contact us and we'll find out the best shipping options for you..
 
NYC CNC Intro to Tig Welding Class 
 
Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.  
 
Find more information at www.learntig.com
 
 
Where Can You Find the Welding Tips and Tricks Forum?
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram

 

Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.

 

Where can you find a Tig Finger?

You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.

 

This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 

 

New music brought to you by Jody's son Jake

Sep 17, 2018

Thanks for listening to episode 109 of the Welding Tips and Tricks Podcast!  For this episode we started off talking about the different fields of welding and how they are to work in them, but the conversation kind of changed to keeping your eyes open for other opportunities.  Most of the time a good conversation just flows from one topic to the next and this one just did that on it's own.  We hope you have a great week and enjoy this conversation!  

 
 If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!  
 
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are Alex Brown, Andy Katanic, Anthony Chrisomalis, Bibli, Black Sheep Fab Shop, Brandon Parry, Cory Dobson, Datum.build, David Doherty, Demented Metal Werkz, Erik Ruppel, Forrever Endeavors, RoboVent, H4 Fab Works, House of Chop, Jacob Elder, Jimi Luck, Kyle Lenker, Lick Skillet Fab, Mike Howe, Noe Sanjuan, Norse Welding, Richard Black, Ricks Welding Service, S&S Metal Fabrication, Scott Tasso, Shane Gunnin, Smashboogie 4x4, Smith Industries, Steven Fish, Tucker, Unobtainium Welding, Veteran Welding Co, Yusuf Khan. 
 
Welding Tips and Tricks T-Shirts  
 
Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL
 
Free Shipping within the USA 
 
Outside the USA please contact us and we'll find out the best shipping options for you..
 
NYC CNC Intro to Tig Welding Class 
 
Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.  
 
Find more information at www.learntig.com
 
 
Where Can You Find the Welding Tips and Tricks Forum?
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram

 

Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.

 

Where can you find a Tig Finger?

You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.

 

This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 

 

New music brought to you by Jody's son Jake

Sep 10, 2018
Thanks for listening to episode 108 of the Welding Tips and Tricks Podcast!  For this episode we thought it was time we discussed Stick Welding.  This is the process most weldors start with and will use off and on during their career, depending on the field they're in.  JD Brewer joined in on this conversation and added some of his experience with stick welding.  We hope you pick up a few tips in this one and they help you take your next step in welding!  Enjoy! 
 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!  
 
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are Alex Brown, Andy Katanic, Anthony Chrisomalis, Bibli, Black Sheep Fab Shop, Brandon Parry, Cory Dobson, Datum.build, David Doherty, Demented Metal Werkz, Erik Ruppel, Forrever Endeavors, RoboVent, H4 Fab Works, House of Chop, Jacob Elder, Jimi Luck, Kyle Lenker, Lick Skillet Fab, Mike Howe, Noe Sanjuan, Norse Welding, Richard Black, Ricks Welding Service, S&S Metal Fabrication, Scott Tasso, Shane Gunnin, Smashboogie 4x4, Smith Industries, Steven Fish, Tucker, Unobtainium Welding, Veteran Welding Co, Yusuf Khan. 
 
Welding Tips and Tricks T-Shirts  
 
Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL
 
Free Shipping within the USA 
 
Outside the USA please contact us and we'll find out the best shipping options for you..
 
NYC CNC Intro to Tig Welding Class 
 
Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.  
 
Find more information at www.learntig.com
 
 
Where Can You Find the Welding Tips and Tricks Forum?
 
Where to find the Lincoln Electric information talked about?
 
Low Hydrogen Porosity
Stick Electrodes
Lincoln Electric.com
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram

 

Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.

 

Where can you find a Tig Finger?

You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.

 

This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 

 

New music brought to you by Jody's son Jake!  

Sep 3, 2018

Thanks for listening to episode 107 of the Welding Tips and Tricks Podcast!  For this episode we had a chance to get to know Scott Thayer who works with Bug-O Systems.  Jonathan knows Scott very well and had fun talking about their past.  If you've never heard of Bug-O or never had a chance to run a mechanized welding system you're missing out on some interesting things.  These systems will never take over the welding industry but they do have their place.  When the job calls for it, it's handy to know what tools to look for!  We hope that this episode opens your eyes to other options that might be available to you or the companies you work for! Enjoy!

 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!  
 
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are Alex Brown, Andy Katanic, Anthony Chrisomalis, Bibli, Black Sheep Fab Shop, Brandon Parry, Cory Dobson, Datum.build, David Doherty, Demented Metal Werkz, Erik Ruppel, Forrever Endeavors, RoboVent, H4 Fab Works, House of Chop, Jacob Elder, Jimi Luck, Kyle Lenker, Lick Skillet Fab, Mike Howe, Noe Sanjuan, Norse Welding, Richard Black, Ricks Welding Service, S&S Metal Fabrication, Scott Tasso, Shane Gunnin, Smashboogie 4x4, Smith Industries, Steven Fish, Tucker, Unobtainium Welding, Veteran Welding Co, Yusuf Khan. 
 
Welding Tips and Tricks T-Shirts  
 
Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL
 
Free Shipping within the USA 
 
Outside the USA please contact us and we'll find out the best shipping options for you..
 
NYC CNC Intro to Tig Welding Class 
 
Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.  
 
Find more information at www.learntig.com
 
 
Where Can You Find the Welding Tips and Tricks Forum?
 
 
Where to get a hold of Scott?
 
On the web at www.Bugo.com
Email at SThayer@bugo.com
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram

 

Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.

 

Where can you find a Tig Finger?

You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.

 

This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 

 

New music brought to you by Jody's son Jake!  

Aug 27, 2018
Thanks for listening to episode 106 of the Welding Tips and Tricks Podcast!  For this episode we're doing a re-post of episode 28 Underwater Welding with Nate Martin.  This past week we had a really hard time lining up our schedules and when we did get together the connection was really bad.  Didn't want to miss posting something so we thought posting one of our favorite episodes would be good.  This episode is one that you can listen to many times and pick up different things each time.  If this is your first time listening to it, you're in for a treat!  Enjoy 
 
 If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!  
 
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are Alex Brown, Andy Katanic, Anthony Chrisomalis, Bibli, Black Sheep Fab Shop, Brandon Parry, Cory Dobson, Datum.build, David Doherty, Demented Metal Werkz, Erik Ruppel, Forrever Endeavors, RoboVent, H4 Fab Works, House of Chop, Jacob Elder, Kyle Lenker, Lick Skillet Fab,Mike Howe, Noe Sanjuan, Norse Welding, Richard Black, Ricks Welding Service, S&S Metal Fabrication, Scott Tasso, Shane Gunnin, Smashboogie 4x4, Smith Industries, Steven Fish, Tucker, Unobtainium Welding, Veteran Welding Co, Yusuf Khan. 
 
Welding Tips and Tricks T-Shirts  
 
Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL
 
Free Shipping within the USA 
 
Outside the USA please contact us and we'll find out the best shipping options for you..
 
NYC CNC Intro to Tig Welding Class 
 
Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.  
 
Find more information at www.learntig.com
 
 
Where Can You Find the Welding Tips and Tricks Forum?
 
 
Where to get a hold of Nate?
 
Intagram @Divern8
Email aquaarc1@cox.net
 
Diving School 
 
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram

 

Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.

 

Where can you find a Tig Finger?

You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.

 

This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 

 

New music brought to you by Jody's son Jake!  

Aug 20, 2018
We get asked often Where, What, How, Why to start something on the side.  Most of the time this also includes a limited budget, which we all understand!  Bootstrapping is how the majority of business start out.  We thought it would be fun to chat about where we like to look for deals and what we like to look for.  This is something that we've talked about a few times in the past but the amount of questions we get about tells us it's a very deep topic and needs more attention!  Hope everyone had a great week! Enjoy!  
 
  If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!  
 
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Hogan, Tucker, Datum.build, Bibli, Forrevver Endeavors, Smashboogie 4x4, Shane Gunnin, David Doherty, Lick Skillet Fab, Norse Welding, Veteran Welding, House of Chop, Erik Ruppel, Smith Industries, Mike Howe, Cory Dobson,Scott Tasso, Anthony Chrisomalis, Richard Black, Yusuf Khan, Black Sheep Fab Shop, Andy Katanic, S&S Metal Fabrication, Chris McQuay, Brandon Parry, Demented Metal Werkz, and Noe Sanjuan.
 
Welding Tips and Tricks T-Shirts  
 
Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL
 
Free Shipping within the USA 
 
Outside the USA please contact us and we'll find out the best shipping options for you..
 
NYC CNC Intro to Tig Welding Class 
 
Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.  
 
Find more information at www.learntig.com
 
 
Where Can You Find the Welding Tips and Tricks Forum?
 


Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram

Interested in weld purging equipment? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.

Where can you find a Tig Finger?

You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.

This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!

Aug 13, 2018

Thanks for listening to episode 104 of the Welding Tips and Tricks Podcast!  For this episode we reached out to our Instagram Stories for some questions.  The response was really great!  We had questions all across the board.  We tried to answer as many as we could in the time we've got and also keep things rolling.  Hope you have fun listening to this one.  It's a little different not having a set topic but that's what makes it fun.  Enjoy everyone!  

 
  If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!  
 
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Hogan, Tucker, Datum.build, Bibli, Forrevver Endeavors, Smashboogie 4x4, Shane Gunnin, David Doherty, Lick Skillet Fab, Norse Welding, Veteran Welding, House of Chop, Erik Ruppel, Smith Industries, Mike Howe, Cory Dobson,Scott Tasso, Anthony Chrisomalis, Richard Black, Yusuf Khan, Black Sheep Fab Shop, Andy Katanic, S&S Metal Fabrication, Chris McQuay, Brandon Parry, Demented Metal Werkz, and Noe Sanjuan.
 
Welding Tips and Tricks T-Shirts  
 
Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL
 
Free Shipping within the USA 
 
Outside the USA please contact us and we'll find out the best shipping options for you..
 
NYC CNC Intro to Tig Welding Class 
 
Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.  
 
Find more information at www.learntig.com
 
 
Where Can You Find the Welding Tips and Tricks Forum?
 


Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram

 

Interested in weld purging equipment? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.

 

Where can you find a Tig Finger?

You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.

 

This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!

Aug 6, 2018

Thanks for listening to episode 103 of the Welding Tips and Tricks Podcast!  For this episode we reached out to April Wilkerson who you may know from her popular YouTube channel.  We wanted to talk with April because she is new to welding and wanted to hear her perspective.  A long with what got her into the maker community doing small odds and ends to building her own shop!  If you've been thinking about starting something this episode might take that spark and light that fire!  Enjoy!  

 
  If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!  
 
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Hogan, Tucker, Datum.build, Bibli, Forrevver Endeavors, Smashboogie 4x4, Shane Gunnin, David Doherty, Lick Skillet Fab, Norse Welding, Veteran Welding, House of Chop, Erik Ruppel, Smith Industries, Mike Howe, Cory Dobson,Scott Tasso, Anthony Chrisomalis, Richard Black, Yusuf Khan, Black Sheep Fab Shop, Andy Katanic, S&S Metal Fabrication, Chris McQuay, and Noe Sanjuan.
 
Welding Tips and Tricks T-Shirts  
 
Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL
 
Free Shipping within the USA 
 
Outside the USA please contact us and we'll find out the best shipping options for you..
 
NYC CNC Intro to Tig Welding Class 
 
Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.  
 
Find more information at www.learntig.com

 
Where can you find April Wilkerson?
 
On Instagram @wilker_dos
On the web at wilkerdos.com
On YouTube at April Wilkerson
 
 
Where Can You Find the Welding Tips and Tricks Forum?
 


Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram

 

Interested in weld purging equipment? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.

 

Where can you find a Tig Finger?

You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.

 

This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!

Jul 30, 2018

Thanks for listening to episode 102 of the Welding Tips and Tricks Podcast!  For this Topic episode we wanted to continue the conversation Jody started with his video post last week of Welding Titanium.  All three of us have some experience welding Titanium but wanted a real expert so we asked Chris McQuay to join in on this conversion.  This episode is filled with golden nuggets and will leave you wanting to order some Titanium to start welding on!  Enjoy!  

 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!  
 
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Hogan, Tucker, Datum.build, Bibli, Forrevver Endeavors, Smashboogie 4x4, Shane Gunnin, David Doherty, Lick Skillet Fab, Norse Welding, Veteran Welding, House of Chop, Erik Ruppel, Smith Industries, Mike Howe, Cory Dobson,Scott Tasso, Anthony Chrisomalis, Richard Black, Yusuf Khan, Black Sheep Fab Shop, Andy Katanic, S&S Metal Fabrication, Chris McQuay, and Noe Sanjuan.
 
Welding Tips and Tricks T-Shirts  
 
Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL
 
Free Shipping within the USA 
 
Outside the USA please contact us and we'll find out the best shipping options for you..
 
NYC CNC Intro to Tig Welding Class 
 
Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.  
 
Find more information at www.learntig.com

 
Where can you find Chris McQuay?
 
On Instagram @Unobtainiumwelding
 
 
Where Can You Find the Welding Tips and Tricks Forum?
 


Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram

 

Interested in weld purging equipment? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.

 

Where can you find a Tig Finger?

You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.

 

This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!

Jul 23, 2018

Thanks for listening to episode 101 of the Welding Tips and Tricks Podcast!  Our guest this week is Andrew Cardin.  Andrew competed in SkillsUSA and came in 5th place in World for welding.  We talked to Andrew about his time before, during, and after competing to see how it has shaped him for his his future career in welding.  

 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!  
 
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Hogan, Tucker, Datum.build, Bibli, Forrevver Endeavors, Smashboogie 4x4, Shane Gunnin, David Doherty, Lick Skillet Fab, Norse Welding, Veteran Welding, House of Chop, Erik Ruppel, Smith Industries, Mike Howe, Cory Dobson,Scott Tasso, Anthony Chrisomalis, Richard Black, Yusuf Khan, Black Sheep Fab Shop, Andy Katanic, S&S Metal Fabrication, and Noe Sanjuan.
 
Welding Tips and Tricks T-Shirts  
 
Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL
 
Free Shipping within the USA 
 
Outside the USA please contact us and we'll find out the best shipping options for you..
 
NYC CNC Intro to Tig Welding Class 
 
Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.  
 
Find more information at www.learntig.com

 
Where can you find Anderw?
 
On Instagram @thebostonweldah
 
 
Where Can You Find the Welding Tips and Tricks Forum?
 


Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram

 

Interested in weld purging equipment? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.

 

Where can you find a Tig Finger?

You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.

 

This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!

Jul 16, 2018

Thanks for listening to the 100th episode of the Welding Tips and Tricks Podcast!  Can you believe that this is the 100th all ready?  For this centennial episode we took a look back to some of the moments that left an impression on us or really dropped some great advise.  Thank You to all of you that listen to this podcast.  With out everyone of you we couldn't keep this going like we have.  Please keep sending us feedback and ideas for the next 100 episodes!  This podcast is for you!  Enjoy!

 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!  
 
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are Frank Cea, Hogan, Tucker, Datum.build, Bibli, Forrevver Endeavors, Smashboogie 4x4, Shane Gunnin, David Doherty, Lick Skillet Fab, Steven Fish, Veteran Welding, WeldyMcWelds, Michael Mendez, House of Chop, Erik Ruppel, Smith Industries, James Yocum, Mike Howe, Cory Dobson,Scott Tasso, Anthony Chrisomalis, Richard Black, Yusuf Khan, Black Sheep Fab Shop, Andy Katanic, S&S Metal Fabrication, and Noe Sanjuan.
 
Welding Tips and Tricks T-Shirts  
 
Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL
 
Free Shipping within the USA 
 
Outside the USA please contact us and we'll find out the best shipping options for you..
 
NYC CNC Intro to Tig Welding Class 
 
Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.  
 
Find more information at www.learntig.com

 
Where Can You Find the Welding Tips and Tricks Forum?
 


Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram

 

Interested in weld purging equipment? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.

 

Where can you find a Tig Finger?

You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.

 

This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!

Jul 9, 2018

Thanks for listening to Episode 99 of the Welding Tips and Tricks Podcast! We reached out to Chris Burke, a friend of Roy's family, who is the owner of CBurke Customes that builds custom cursing bikes. These are not your run of the mill bikes though. Anyone that sees these turn their heads to watch them ride by and possibly stop them to take a closer look. Chris told us his story of how he got into building these bikes and where he's wanting to take his company. Hope this one can inspire any of you to take that first step and make whatever it is you have in your mind. Just takes that first push and you're off. Enjoy!

 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!  
 
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are Frank Cea, Hogan, Tucker, Datum.build, Bibli, Forrevver Endeavors, Smashboogie 4x4, Shane Gunnin, David Doherty, Lick Skillet Fab, Steven Fish, Veteran Welding, WeldyMcWelds, Michael Mendez, House of Chop, Erik Ruppel, Smith Industries, James Yocum, Mike Howe, Cory Dobson,Scott Tasso, Anthony Chrisomalis, Richard Black, Yusuf Khan, Black Sheep Fab Shop, Andy Katanic, S&S Metal Fabrication, and Noe Sanjuan.
 
NYC CNC Intro to Tig Welding Class 
 
Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.  
 
Find more information at www.learntig.com

Where can you Find Chris Burke?
 
On Instagram @CBurkecustoms
On Facebook at CBurke Customs
 
 
Where Can You Find the Welding Tips and Tricks Forum?
 


Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram

 

Interested in weld purging equipment? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.

 

Where can you find a Tig Finger?

You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.

 

This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!

Jul 2, 2018

Thanks for listening to Episode 98 of the Welding Tips and Tricks Podcast! We received an email from a listener asking if we could do a topic on the issues you have running a small business out of your home garage. Things like noise problems and neighbors. We felt this could be something that a lot of people listening could relate to so we dove right in. As normal it took a few twists and turns but if you've been thinking of setting up your home shop you'll want to pay attention to this one for sure! Enjoy!

If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!  
 
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are Frank Cea, Aiden Wells, Hogan, Tucker, Datum.build, Bibli, Forrevver Endeavors, Smashboogie 4x4, Shane Gunnin, David Doherty, Lick Skillet Fab, Steven Fish, Veteran Welding, WeldyMcWelds, Michael Mendez, House of Chop, Erik Ruppel, Smith Industries, James Yocum, Mike Howe, Cory Dobson,Scott Tasso, Anthony Chrisomalis, Richard Black, Yusuf Khan, Black Sheep Fab Shop, Andy Katanic, S&S Metal Fabrication, and Noe Sanjuan.
 
NYC CNC Intro to Tig Welding Class 
 
Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.  
 
Find more information at www.learntig.com

 
Where Can You Find the Welding Tips and Tricks Forum?
 


Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram

 

Interested in weld purging equipment? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.

 

Where can you find a Tig Finger?

You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.

 

This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!

Jun 25, 2018

Thanks for listening to Episode 97 of the Welding Tips and Tricks Podcast!  For this episode we had a great time chatting with Nick Bezates from Bezates Construction and @Bezatesn on Instagram.  If you're not following Nick on Instagram you're really missing out!  In this episode Nick really drops some great information about planning for jobs and the importance of having backups a long with much more!  

 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!  
 
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are Frank Cea, Aiden Wells, Hogan, Tucker, Datum.build, Bibli, Forrevver Endeavors, Smashboogie 4x4, Shane Gunnin, David Doherty, Lick Skillet Fab, Steven Fish, Veteran Welding, WeldyMcWelds, Michael Mendez, House of Chop, Erik Ruppel, Smith Industries, James Yocum, Mike Howe, Cory Dobson,Scott Tasso, Anthony Chrisomalis, Richard Black, Yusuf Khan, Black Sheep Fab Shop, Andy Katanic, S&S Metal Fabrication, and Noe Sanjuan.
 
NYC CNC Intro to Tig Welding Class 
 
Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.  
 
Find more information at www.learntig.com

Where Can You Find Nick?
 
On Instagram @Bezatesn
On LinkedIn Bezates Construction 
 
 
Where Can You Find the Welding Tips and Tricks Forum?
 


Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram

 

Interested in weld purging equipment? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.

 

Where can you find a Tig Finger?

You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.

 

This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!

Jun 18, 2018

Thanks for listening to episode 96 of the Welding Tips and Tricks Podcast.  For this episode we thought it would be fun to continue the conversion we started during a bonus After Show episode for our Patreon members.  We were talking about Material Prep and how important these simple steps can be.  Their very easily stepped over and as soon as you strike the arc you know if you took the right steps or not.  Hopefully you'll be able to come away from this episode with a few tips that will improve the end results of your welds dramatically.  Enjoy!

 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!  
 
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are Frank Cea, Aiden Wells, Hogan, Tucker, Datum.build, Bibli, Forrevver Endeavors, Smashboogie 4x4, Shane Gunnin, David Doherty, Lick Skillet Fab, Steven Fish, Veteran Welding, WeldyMcWelds, Michael Mendez, House of Chop, Erik Ruppel, Smith Industries, James Yocum, Mike Howe, Cory Dobson,Scott Tasso, Anthony Chrisomalis, Richard Black, Yusuf Khan, Black Sheep Fab Shop, Andy Katanic, S&S Metal Fabrication, and Noe Sanjuan.
 
NYC CNC Intro to Tig Welding Class 
 
Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.  
 
Find more information at www.learntig.com

Here are a few Amazon links to some of the products mentioned in this episode! 
 
 
 
Where Can You Find the Welding Tips and Tricks Forum?
 


Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram

 

Interested in weld purging equipment? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.

 

Where can you find a Tig Finger?

You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.

 

This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!

Jun 11, 2018

Thanks of listening to episode 95 of the Welding Tips and Tricks Podcast!  For this episode we thought it would be fun to tie into Jody's 2 part 6G videos presently posted.  If you're wanting to take a 6G test or think you might have one coming up at some point you'll want to pay close attention to this one!  Jody and Jonathan really drop a lot of great tips on how to prepare your self to pass this test!  

 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!  
 
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are Frank Cea, Aiden Wells, Hogan, Tucker, Datum.build, Bibli, Forrevver Endeavors, Smashboogie 4x4, Shane Gunnin, David Doherty, Lick Skillet Fab, Steven Fish, Veteran Welding, WeldyMcWelds, Michael Mendez, House of Chop, Erik Ruppel, Smith Industries, James Yocum, Mike Howe, Cory Dobson,Scott Tasso, Anthony Chrisomalis, Richard Black, Yusuf Khan, Black Sheep Fab Shop, Andy Katanic, S&S Metal Fabrication, and Noe Sanjuan.
 
NYC CNC Intro to Tig Welding Class 
 
Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.  
 
Find more information at www.learntig.com

 
Where Can You Find the Welding Tips and Tricks Forum?
 


Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram

 

Interested in weld purging equipment? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.

 

Where can you find a Tig Finger?

You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.

 

This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!

Jun 4, 2018

Thanks for listening to episode 94 of the Welding Tips and Tricks Podcast!  For this episode we had a great time chatting with Jason Marburber owner of Fireball Tool.  We've been wanting to chat with Jason for awhile now about his great tools so we figured now was the time.  Jonathan was out of town during this recording so we thought it would be fitting to have JD Brewer back on with us to chat about the Fireball Tools that he uses all the time and how they have helped him become more productive for Apex Welding.  Be sure to check out all of Jason's tools and support his store!  

 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!  
 
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are Frank Cea, Aiden Wells, Shane Gunnin, David Doherty, Lick Skillet Fab, Steven Fish, Veteran Welding, WeldyMcWelds, Michael Mendez, House of Chop, Erik Ruppel, Smith Industries, James Yocum, Mike Howe, Cory Dobson,Scott Tasso, Anthony Chrisomalis, Richard Black, Yusuf Khan, Black Sheep Fab Shop, Andy Katanic, S&S Metal Fabrication, and Noe Sanjuan.
 
NYC CNC Intro to Tig Welding Class 
 
Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.  
 
Find more information at www.learntig.com
 
 
Where Can You Find More About Fireball Tool?
 
On the web at www.Fireballtool.com
On Instagram @Fireballtool
 
Where Can You Find the Welding Tips and Tricks Forum?
 


Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram

 

Interested in weld purging equipment? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.

 

Where can you find a Tig Finger?

You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.

 

This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!

May 28, 2018

Thanks for listenting to episode 93 of the Welding Tips and Tricks Podcast!  For this episode we had a great chat with Chris Reader owner and operator of Veteran Welding Company in Alberta Canada!  Chris reached out to us to help spread the word about the mission of helping other Veterans get back into civilian life using some of the training received while in the military and deal with other things such as PTSD.  If you're a Veteran you'll really want to listen to this one and if not you'll come out with a few extra thoughts about how to run your company or possible just being a better employee.  Enjoy!  

 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!  
 
Where can you find more information about Veteran Welding Company?
 
On the Web at www.veteranweldingcompany.ca
On Instagram @veteranwelding
On Facebook  Veteran Welding Company
 
  
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are Frank Cea, Aiden Wells, Shane Gunnin, David Doherty, Lick Skillet Fab, Steven Fish, Veteran Welding, WeldyMcWelds, Michael Mendez, House of Chop, Erik Ruppel, Smith Industries, James Yocum, Mike Howe, Cory Dobson,Scott Tasso, Anthony Chrisomalis, Richard Black, Yusuf Khan, Black Sheep Fab Shop, Andy Katanic, S&S Metal Fabrication, and Noe Sanjuan.
 
NYC CNC Intro to Tig Welding Class 
 
Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.  
 
Find more information at www.learntig.com

 
Where Can You Find the Welding Tips and Tricks Forum?
 


Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram

 

Interested in weld purging equipment? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.

 

Where can you find a Tig Finger?

You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.

 

This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!

1 2 3 4 5 Next »