Thank you for listening to the Welding Tips and Tricks Podcast episode 155. During last weeks After Show we had talked about welding razor blades together with the Fronius MagicWave 230i and Jody had asked about using High Speed Pulse. After that we thought it would be a good topic so here it is! Have you ever tried it? If not, you'll want to take some notes and if you think the project you're working on could benefit from it, do some tests! Have a great week everyone! Enjoy!
Thank you for listening to episode 154 of the Welding Tips and Tricks Podcast! For this episode we had a great time chatting with @5thstreetfab aka Max Hemphill. If you're not following Max stop now and go do it! Max has some amazing aluminum welds and much more! Talking with Max we learned a lot about the type of work he's doing and some tricks to how he gets those perfect welds. Be sure to take some mental notes! Enjoy!
We're back with a new episode of the Welding Tips and Tricks Podcast! We've been asked a few times to do a topic episode about Tig Torch Amp Controllers. There are loads of different types and styles out there and we have used a lot of them so we go over some that we've liked and some that we didn't like. We know that there are many more styles out there that we've never seen before too. This episode is more just an overview of the basic styles to let you know the different options out there so you can look into them to possibly help you out with your projects! Hope you find some good tips or sparks some interest! Enjoy!
Thank you for listening to episode 152 of the Welding Tips and Tricks Podcast! For this episode we all were out of town so we were not able to record but thought it was a good time to re-post an old episode with Cody Swinehart from Quarter Tilt Kreations. This was a really great episode! The audio is a little rough but the content is great! This also shows you how far we've come with the podcast! Thank you everyone for supporting us here on the podcast! With out your support we wouldn't be able to keep this going. We hope you enjoy this re-posting and we'll be back with a new episode next week! Enjoy!
Thank you for listening to episode 151 of the Welding Tips and Tricks Podcast! For this episode our special guest is Mike Challgren. If you are apart of the welding community on Instagram we're sure you have heard that name and seen Mike's great wire frame sculptures. We have been wanting to get Mike on for a long time now and finally were able to make it happen. We enjoyed hearing about Mike's past and what lead him to where he is today. Hope everyone enjoys this episode as much as we did.
Thank you for listening to episode 150 of the Welding Tips and Tricks Podcast! Can you believe we're at episode 150!?! We've been getting a bunch of emails and DMs asking about different troubleshooting issues so we thought it would be a good time to have another Troubleshooting conversation! Our last Troubleshooting episode was 55. We hope that we touch on something that you might have been having problems with and or can stick in your mental notes for a later date! Thank you everyone for the support! Enjoy!
Thank you for listening to episode 149 of the Welding Tips and Tricks Podcast! For this weeks episode we had a great time chatting with @Lattinprecision aka Eli Lattin. If you're not following Eli you need to stop everything now and go follow!! Eli is a wealth of knowledge and he really dropped a lot of it in this episode. If you're new to the game or a seasoned veteran you'll really want to pay close attention and take some good mental notes. Thanks again Everyone!! Enjoy!
Thank you for listening to episode 148 of the Welding Tips and Tricks Podcast! For this episode we thought it would be a good time to stop and take a few to look back at how our 2019 is going. Mid Year Review from what we said we wanted to do at the beginning of the year. It's crazy to think that 2019 is half over! Hope this episode helps you stop and review how your year is going and get you thinking of how you would like to finish out 2019! Thanks again for listening! Enjoy!
Thank you for listening to episode 147 of the Welding Tips and Tricks Podcast! For this episode we had a great conversation with Works By A Hurst aka Jason Hurst. If you're not following Jason on his channels you're really missing out. Jason is known for many things but most of all his sculpting and art work. We talk about what got him into metalworking and where he sees it taking him in the future. We hope you enjoy this episode and pick up a few great tips along the way. Thanks for listening everyone! Enjoy!
If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from. It's always great to hear what our listeners think. Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners. Thanks!
Thank you for listening to episode 146 of the Welding Tips and Tricks Podcast! For this episode we reached out to you all on Instagram for some questions so we could do a listener Q&A and received a lot of great questions for that story. We picked a few to chat about and just let the conversation flow! We hope you enjoy this episode and have a great week!
If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from. It's always great to hear what our listeners think. Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners. Thanks!
Thank you for listening to episode 145 of the Welding Tips and Tricks Podcast! For this weeks episode our guest is Tig Junkie aka Patrick Murray. We had a chance to meet Patrick at Fabtech this past year. He flew all the way from Australia to join in on the fun. During our conversation we chat about what got Patrick into welding among many other things! We hope you enjoy this weeks show. Thank you again for listening!
Thank you for listening to episode 144 of the Welding Tips and Tricks Podcast. We thought it would be a good time to talk about Grinders. Why you might ask? Because we all have a need for them in almost ever aspect of welding. They might not be the most glamorous tool in our toolbox but at times they can be very valuable. Also does cost and brand really matter? These are the things we chat about this week. Hope everyone has a great week! Enjoy!
image: https://assets.libsyn.com/secure/show/83032/Bug_O.jpg
Thank you for listening to episode 143 of the Welding Tips and Tricks Podcast! For this episode we thought it would be fun to have a revisit with a past guest, Abom79 aka Adam Booth. If you remember we had Adam on for episode 49. A lot has changed for Adam since then so we wanted to chat and catch up a bit. We hope you enjoy this episode and if you're on the doorstep of going out on your own, you don't want to miss this one! Enjoy!
Thank you for listening to episode 142 of the Welding Tips and Tricks Podcast! For this episode we thought it fitting that we chat about Safety in your own shops. Roy had a close call with dropping a heavy angle block off the table and landed on his foot. Thankfully he was wearing steel toe shoes. Would you normally be? This is the questions that we talk about and try to bring up some concerns with working for your self at home or in a small shop environment. We hope this episode makes you double think how you work in your own shop! Have a great week and stay safe!!
Thank you for listening to episode 141 of the Welding Tips and Tricks Podcast! For this episode we chatted about Does Cup Size Really Matter? We all have our favorites and our go to's when it comes to Tig but do they really make a difference or just personal preference? Listen to find out more. Enjoy!
For this weeks Episode we thought it would be fun to look back and tell a few funny stories from our past and just see where the conversation flows. We weren't really sure where it would lead but thought it would be entertaining with possible a few tips along the way. Have a great week everyone!
For this episode our guest is DDeMoise aka David DeMoise. We have been wanting to get David on for a while and we finally did. We talk about everything from his past up to his present. What got him into making fixture tables and much more. Went down a few rabbit holes too. We hope you enjoy this conversation and have a great week!! Enjoy!
Thank you for listening to episode 138 of the Welding Tips and Tricks Podcast. For this episode we had a great conversation with John Saunders from Saunders Machine Works and NYCCNC on youtube about ROI. If you're running a business or thinking about starting a side hustle you'll want to listen to this one a few times and take lots of notes! Really an eye opening conversation for sure!
Thank you for listening to episode 137 of the Welding Tips and Tricks Podcast! For this episode we take some time and reflect on how the podcast has changed our lives. From where we are now to where we could have been with out it, how it has impacted us, how we hope it has impacted you the listeners. We have had a lot of fun bring this podcast to you for your enjoyment and look forward to what the future holds! Enjoy!
Thank you for listening to episode 136 of the Welding Tips and Tricks Podcast! For this episode we talk about what's the best way to approach a prospective or current customer when they call you up saying they have a frame or part all tacked up ready for you to weld. When it's someone you've never met before this can be very interesting. Do you just say no or do you give a shot. Give this one a listen and see what we think. Have a great week everyone!!
Thank you for listening to episode 135 of the Welding Tips and Tricks Podcast! For this episode our guest is @Ricks_Got_It aka Rick Bishop. We had a great conversation with Rick finding out what got him into welding and what lead him to starting Rick's Welding Service. If you're new to the trade we hope you pay close attention to what Rick has to say. Might lead you in a new direction. Hope everyone has a great week! Enjoy!
Thank you for listening to episode 134 of the Welding Tips and Tricks Podcast! With all the new Tools, Gadgets, and Gizmos out on the market we thought it would be fun to talk about the ones we like to use and some that would like to get. We hope that this episode sparks an interest in you to grow your tool collection as it does ours! Enjoy!
Thank you for listening to episode 133 of the Welding Tips and Tricks Podcast! For this episode we chat with Chris Bliven aka Milkycereal83 on Instagram and YouTube. Chris is a salesman for Fronius USA but is also a weldor. We wanted to hear how Chris got into welding and what lead him to work with Fronius. We had a fun time chatting with Chris and hope you enjoy it too!
Thank you for listening to episode 132 of the Welding Tips and Tricks Podcast! For this week's topic we open the conversation of what is a PQR and WPS? What are they for and who are they for? As always this is a very deep subject and we only really scratch the surface, but we hope that our conversation sparks an interest in you to research this further. Enjoy!
Thank you for listening to episode 131 of the Welding Tips and Tricks Podcast! For this episode we wanted to talk about the not so great parts of running your own business. Not to be a downer but to let you know that it can be a real struggle at times. If you're thinking of stepping out on your own these are real things that you'll deal with and if you're already on your own you're not alone. We hope that this chat opens you're eyes a little more to the other side of the table! Enjoy!