Categories
Thank you for listening to episode 173 of the Welding Tips and Tricks Podcast! Well, we made it to the end of 2019. In all honesty it went by in a blink. For this episode we thought it would be fun to take a look back at not only this past year but the past decade. We hope this episode inspires you to do the same thing and look back at how much your life has changed in the past 10 years. Are you happy with what you see? Would you have changed anything? These are what we asked each other. Hope you have a great New Years and start off this next decade with a bang! Enjoy!
For this week's Stubby Jonathan answers a question about being picked on at work. This is something that we all have dealt with either being new in the industry or sometime just being the new weldor in a shop. Hope this sheds some light on the subject. Enjoy!
Disclaimer: Just trying something a little different with the editing of this Stubby. The music sounded like it would fit with a little tweaking. Let us know what you think along with your next set of questions for future Stubby Episodes!
If your looking to a top quality torch be sure to check out all of CK Worldwide products. Do you have a specialty job coming up that a normal torch just wont work, CK Worldwide most likely will have the right solution for you. Be sure to head over to CKworldwide.com to see all their great products!
If you have a question for us to answer in a Stubby episode please send them to Weldingtipsandtrickspodcast@gmail.com and put Stubby in the subject line. Thank you!
Thank you for listening to Episode 172 of the Welding Tips and Tricks Podcast! For this week's episode we had a great conversation with Pete Murphy from ISOTunes about hearing protection. This is something we always think about after the fact or sometimes not at all. I know when we're young we think we do not need any protection but that comes as a cost as you get older. Hope this episode helps you think about your hearing before you start you day at work, everyday! Have a great week! Enjoy
For this weeks Stubby episode Jody talks all about Gas Flow Settings. We're sure you'll pick up a few tips in this short episode! Thank you for all your support and be sure to send in your questions to Weldingtipsandtrickspocast@gmail.com. Enjoy!
If your looking to a top quality torch be sure to check out all of CK Worldwide products. Do you have a specialty job coming up that a normal torch just wont work, CK Worldwide most likely will have the right solution for you. Be sure to head over to CKworldwide.com to see all their great products!
If you have a question for us to answer in a Stubby episode please send them to Weldingtipsandtrickspodcast@gmail.com and put Stubby in the subject line. Thank you!
Thank you for listening to Episode 171 of the Welding Tips and Tricks Podcast! For this episode we had a fun chat with @deepsouthdimestacker aka Brad Goodman. During this chat we covered a lot of ground from what got Brad into welding, running a business, fixing boats, and much more. We hope you enjoy this chat as much as we did! Thank you for listening and be sure to share the podcast with your fellow co-workers!
Thank you for listening to this weeks Stubby Episode of the Welding Tips and Tricks Podcast! This weeks Stubby is about holding Tolerances. If you lay beautiful welds and blow the dimensions you just made a nice looking piece of scrap. Roy tells us a little more about his process when it comes to holding tolerances. Enjoy
Thank you to CK Worldwide for sponsoring this Stubby Episode!
If your looking to a top quality torch be sure to check out all of CK Worldwide products. Do you have a specialty job coming up that a normal torch just wont work, CK Worldwide most likely will have the right solution for you. Be sure to head over to CKworldwide.com to see all their great products!
If you have a question for us to answer in a Stubby episode please send them to Weldingtipsandtrickspodcast@gmail.com and put Stubby in the subject line. Thank you!
Thank you for listening episode 170 of the Welding Tips and Tricks Podcast! For this weeks topic we chat about Tig Brazing! Jody recently posted a video of modifying a file into a knife and added a lot of Alumimun and Silicon Bronze to shape a handle. We wanted to dive a little deep into this conversation and chat about the different types of Tig Brazing we have done and how we have done it best. Hope you get a few good tips out of this one! Enjoy
This week's Stubby was recorded live at Fabtech between Jody and Sidni Hinesley from Georgia Trade School. The audio is a little rough but the content is great. We hope you enjoy this Stubby and have great week!
If you would like to hear your question answered on a Stubby Episode be sure to send it to WeldingTipsandTricksPodcast@gmail.com
Here is your First Listen to episode 169. For this weeks topic we went with a requested topic from our Live recording at Fabtech and we have also been asked to talk about this many times before. This topic is Tig welding Anodized Aluminum. There are many ways to weld this but we talk about the ways we have done it before in the past. Hope you can get some good tips from this one and when an anodized job comes across you bench you'll feel more comfertable of where to start. Enjoy!
Thank you for listening to this Stubby episode of the Welding Tips and Tricks Podcast! For this weeks Stubby Jonathan answers a question about Quitting. This is one that all of us have had to ask ourselves before sometimes more than once. We hope that this Stubby might help you answer your questions abut quitting.
Thank you to CK Worldwide for sponsoring this Stubby Episode!
If your looking to a top quality torch be sure to check out all of CK Worldwide products. Do you have a specialty job coming up that a normal torch just wont work, CK Worldwide most likely will have the right solution for you. Be sure to head over to CKworldwide.com to see all their great products!
If you have a question for us to answer in a Stubby episode please send them to Weldingtipsandtrickspodcast@gmail.com and put Stubby in the subject line. Thank you!
Thank you for listening to the Welding Tips and Tricks Podcast! For this weeks episode we review Fabtech 2019! Now that the show is over we wanted to chat about what all we saw this year, who we met, what we bought, and more. We hope you were able to make it and if not start planning to go to Fabtech 2020 Now!
Thank you for listening to this weeks Stubby Episode! This question is one we get often and thought it would be a good one to include for all to hear. If you're in school for welding be sure to listen up!
Thank you to CK Worldwide for sponsoring this Stubby Episode!
If your looking to a top quality torch be sure to check out all of CK Worldwide products. Do you have a specialty job coming up that a normal torch just wont work, CK Worldwide most likely will have the right solution for you. Be sure to head over to CKworldwide.com to see all their great products!
If you have a question for us to answer in a Stubby episode please send them to Weldingtipsandtrickspodcast@gmail.com and put Stubby in the subject line. Thank you!
Thank you for listening to the Welding Tips and Tricks Podcast! For this weeks episode we're posting our Live recording from Fabtech 2019. We had a great time and was amazed how many people took time out of there Fabtech to come see us talk and answer their questions! The audio quality isn't the best but better than we thought it would be. Hope you enjoy this Live recording and have a great week!
This weeks Stubby is about needing to be able to Read Blueprints and understand Welding Symbols? This question comes from Charles Price who is a welding instructor at the Mayfield/Graves County Area Technology Center in Mayfield, KY. Charles sent us a list of very common questions he gets from his students. We hope you enjoy this short episode and look forward to hearing your questions!
Thank you to CK Worldwide for sponsoring this Stubby Episode!
If your looking to a top quality torch be sure to check out all of CK Worldwide products. Do you have a specialty job coming up that a normal torch just wont work, CK Worldwide most likely will have the right solution for you. Be sure to head over to CKworldwide.com to see all their great products!
If you're heading to Fabtech be sure to take the time to stop by the CK Booth and see first hand all the different torches and products CK offers!
If you have a question for us to answer in a Stubby episode please send them to Weldingtipsandtrickspodcast@gmail.com and put Stubby in the subject line. Thank you!
Thank you for listening to Episode 166 of the Welding Tips and Tricks Podcast! For this episode our guest is Weld Like a Girl aka Michelle Villalobos. We had a great time chatting with Michelle hearing how she got into the trade along with many other things. When running your own business you wear many hats and Michelle wears them all along with looking for new hats at the same time. If you're wanting to start a business you'll want to take some notes! Enjoy!
Thank you for listening to Stubby episode 3. This Stubby is about Job Ads. What to look for and what they might mean in their ads. Also, Jody touches on a few good tips on what to say during an interview. Enjoy!
Thank you to CK Worldwide for sponsoring this Stubby Episode!
If your looking to a top quality torch be sure to check out all of CK Worldwide products. Do you have a specialty job coming up that a normal torch just wont work, CK Worldwide most likely will have the right solution for you. Be sure to head over to CKworldwide.com to see all their great products!
If you're heading to Fabtech be sure to take the time to stop by the CK Booth and see first hand all the different torches and products CK offers!
If you have a question for us to answer in a Stubby episode please send them to Weldingtipsandtrickspodcast@gmail.com and put Stubby in the subject line. Thank you!
Thank you for listening to episode 165 of the Welding Tips and Tricks Podcast! Fabtech is Next week so we thought it would be a good time to do a Preheat Show. We talk about what to expect and what all we have going on this year at Fabtech 2019. It's going to be a great show but very busy too! We look forward to seeing all of you there! Enjoy!
Thank you for listening to the Stubby episode 2. For this Stubby we answer a question from Brandon Perry about what do you do when you dip your tungsten during a weld test? Is it a done deal or are there things you can do to save the test and still land the job. Roy talks about how he has dealt with weld tests in the past. Enjoy!
Thank you to CK Worldwide for sponsoring this Stubby Episode!
If your looking to a top quality torch be sure to check out all of CK Worldwide products. Do you have a specialty job coming up that a normal torch just wont work, CK Worldwide most likely will have the right solution for you. Be sure to head over to CKworldwide.com to see all their great products!
If you're heading to Fabtech be sure to take the time to stop by the CK Booth and see first hand all the different torches and products CK offers!
If you have a question for us to answer in a Stubby episode please send them to Weldingtipsandtrickspodcast@gmail.com and put Stubby in the subject line. Thank you!
Thank you for listening to the first Stubby Episode! We wanted a better way of answering questions that we get from all of you, our listeners. We hope that you enjoy this short form episode and join in by sending in your own questions!
This weeks Stubby is answering the question about how to deal with Wet 7018s.
Thank you to CK Worldwide for sponsoring this Stubby!
Be sure to check out www.ckworldwide.com for all you Tig Torch needs. All of us here on the podcast really enjoy using CK products. If you're heading to Fabtech 2019 be sure to stop in the CK booth (B33015) to see for yourself all the different kinds of products they offer to this great industry!
If you would like to send in your questions please send them to WeldingTipsandTrickspodcast@gmail.com and please use Stubby in the Subject Line!
Enjoy!
Thank you for listening to episode 161 of the Welding Tips and Tricks Podcast! For this episode we go over some of the odd tools that we have always liked to have in our boxes over the years. These tools are not common in the welding world and might be something that could help you as they have helped us along the way. We hope this episode helps you look outside the normal world of welding tools and gets you to explore more options! Have a great week and Enjoy!
Thank you for listening to episode 160 of the Welding Tips and Tricks Podcast! For this episode we had a great conversation with someone that goes by a few different names. Some of you might know him as Jose Gomez, some as Pep, and some as @Lostartsforge. We have wanted to get Pep on for a long time because he has a very interesting background in welding and blacksmithing. We hope you enjoy this episode as much as we did recording. Get ready to sit back and listen! Have a great week everyone!
Thank you for listening to episode 159 of the Welding Tips and Tricks Podcast. For this episode we thought it would be fun to talk about Shop Layouts. There are many different types of shops and how they are laid out can make a big difference in whether or not they are efficient or not. We talk about shops we've worked in and how we would like to see our shops in the future. Hope this episode helps you stop and look at how your shop is laid out and possibly spark an interest in you to move some things around! Enjoy!