Info

Welding Tips and Tricks Podcast

Welcome to the Welding Tips and Tricks Podcast brought to you by Jody Collier, Jonathan Lewis, and Roy Crumrine! We wanted to bring you a podcast talk about welding from a weldors point of view like you. Our goal is to give you, the listener, another great way to experience Welding Tips and Tricks. Listen to welding shop talk while welding, or driving home! Thanks for tuning in and enjoy the ride!
RSS Feed
Welding Tips and Tricks Podcast
2020
November
October
September
August
July
June
May
April
March
February
January


2019
December
November
October
September
August
July
June
May
April
March
February
January


2018
December
November
October
September
August
July
June
May
April
March
February
January


2017
December
November
October
September
August
July
June
May
April
March
February
January


2016
December
November
October
September
August
July
June


Categories

All Episodes
Archives
Categories
Now displaying: 2020
Nov 23, 2020

Thank you for listening to episode 220 of the Welding Tips and Tricks Podcast!  For this week's episode we talk about unconventional welding styles.  We started off with some of the things we have done in our careers which lead into some of the things we have seen and so on.  We hope you enjoy this episode and it sparks a few thoughts in your head about the things you've done or ideas of things you could do in the future!  Have a great week and Enjoy! 

 

If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!  

 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Ryan Shelley.
 
 
Where Can You Find the Welding Tips and Tricks Forum?
 
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram
 
 
Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.
 
Where can you find a Tig Finger?
 
You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.
 
 
This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!   
Nov 16, 2020

Thank you for listening to episode 219 of the Welding Tips and Tricks Podcast!  For this week's episode we talk more about welding Aluminum.  In past episodes we talked about basic Tig welding aluminum (ep 163) but we wanted to expand on that more and talk about some different processes.  We hope this episode helps you think about different options that could be used in different scenarios.  Have a great week! 

 

If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!  

 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Ryan Shelley.
 
 
Where Can You Find the Welding Tips and Tricks Forum?
 
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram
 
 
Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.
 
Where can you find a Tig Finger?
 
You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.
 
 
This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!    
Nov 9, 2020

Thank you for listening to episode 218 of the Welding Tips and Tricks Podcast!  For this week's episode we talk about the 3 things we each think you should know about welding when you're getting into the trade.  If you're new to this industry you'll want to really pay attention and if you're a seasoned welder see if you agree with what we think.  Also, for those seasoned welders listening what would you say?  It's interesting to think about.  We hope you enjoy this episode and have a great week!   

 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!  
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Ryan Shelley.
 
 
Where Can You Find the Welding Tips and Tricks Forum?
 
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram
 
 
Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.
 
Where can you find a Tig Finger?
 
You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.
 
 
This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding! 
Nov 2, 2020

Thank you for listening to episode 217 of the Welding Tips and Tricks Podcast!  For this week's chat we talk all about weld inspection tools.  Some of these tools are general inspection and some are more official inspection tools.  Do you need them or don't you need them?  Listen to find out what we think.  Hope everyone has a great week!!  Enjoy!

 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!  
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Ryan Shelley.
 
 
Where Can You Find the Welding Tips and Tricks Forum?
 
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram
 
 
Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.
 
Where can you find a Tig Finger?
 
You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.
 
 
This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding! 
Oct 26, 2020

Thank you for listening to Episode 216 of the Welding Tips and Tricks Podcast! For this week's episode we had a fun conversation with Jason Marburger from Fireball Tools and JD Brewer from Apex welding. We didn't really have any topic, just wanted to catch up with these two and see where the conversation went. We hope you enjoy this episode and are able to pick out a few tips and tricks along the way! Have a great week everyone! Enjoy!   

 
 If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!  
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Ryan Shelley.
 
 
Where Can You Find the Welding Tips and Tricks Forum?
 
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram
 
 
Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.
 
Where can you find a Tig Finger?
 
You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.
 
 
This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!  
Oct 19, 2020

Thank you for listening to the Welding Tips and Tricks Podcast!  For this week's episode we answer another question we get often.  Which is stronger, Stick or Mig?  Now we're not metallurgists by any means so this is just a conversation between a few welders...  We hope this conversation gets you thinking about the process you're doing and why you might be doing that one over another.  We enjoy answering questions like this so please be sure to send us your questions!  Thank you Jared for this one!  Have a great week everyone! 

 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!  
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Ryan Shelley.
 
 
Where Can You Find the Welding Tips and Tricks Forum?
 
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram
 
 
Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.
 
Where can you find a Tig Finger?
 
You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.
 
 
This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!  
Oct 12, 2020

Thank you for listening to episode 214 of the Welding Tips and Tricks Podcast!  For this week's episode we are doing Part 2 of the question we received from Andrew last week.  This part of the question is mainly based on whether the current machines he has are good enough to get started.  We started with this and just let the conversation flow from there.  Hope you enjoy this week's chat and have a great week!  

If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!  
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Ryan Shelley.
 
 
Where Can You Find the Welding Tips and Tricks Forum?
 
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram
 
 
Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.
 
Where can you find a Tig Finger?
 
You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.
 
 
This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!
Oct 5, 2020

Thanks for listening to Episode 213 of the Welding Tips and Tricks Podcast!  For this week's chat we answer part of a question we got from a listener.  Andrew asked a few questions about starting his own business.  We ended up talking mostly about certifications in this episode but will have a part 2 coming up to answer the rest of the questions.  If you have any questions you'd like to hear answered be sure to shoot us a DM or Email!  Have a great week everyone!  

 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!  
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.
 
 
Where Can You Find the Welding Tips and Tricks Forum?
 
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram
 
 
Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.
 
Where can you find a Tig Finger?
 
You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.
 
 
This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding! 
Sep 28, 2020

Thank you for listening to Episode 212 of the Welding Tips and Tricks Podcast!  For this week's conversion we talk about Corded vs Battery tools!  Being welders we're always being tasked with doing way more than just welding and we wanted to talk about our thoughts on which is better to invest in and why we think so.  This is just our general thoughts and something to keep in mind when you're looking into outfitting your shop or rig with tools!  We hope you enjoy this week's chat and have a great week!!  

 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!  
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.
 
 
Where Can You Find the Welding Tips and Tricks Forum?
 
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram
 
 
Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.
 
Where can you find a Tig Finger?
 
You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.
 
 
This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!
Sep 21, 2020

Thank you for listening to episode 211 of the Welding Tips and Tricks Podcast!  For this week's conversation we talk with Smith Industries, owner Mike Smith, @smithidustries007 on Instagram.  We asked Mike about how he got into the field and what has it been like running your own company along with many other topics!  We hope you get a few laughs out of this one and also pick up a few great tips!  Have a great week!  

 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!  
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.
 
Where can you find Mike?
 
On instagram @smithindustries007
 
Where Can You Find the Welding Tips and Tricks Forum?
 
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram
 
 
Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.
 
Where can you find a Tig Finger?
 
You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.
 
 
This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!
Sep 14, 2020

Thank you for listening to Episode 210 of the Welding Tips and Tricks Podcast!  For this week's chat we talk about some of our favorite and not so favorite side hustle jobs we've had.  We hope this conversation brings you back to some of your beginning jobs that helped you along the way!  Have a great week everyone!  Enjoy!  

 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!  
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.
 
 
Where Can You Find the Welding Tips and Tricks Forum?
 
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram
 
 
Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.
 
Where can you find a Tig Finger?
 
You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.
 
 
This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!
Sep 10, 2020
Thank you for listening to Episode 209 of the Welding Tips and Tricks Podcast!  This week's episode is going way back to revisit episode 1.   We were not able to record this past week just because we all we're busy or traveling.  We thought it would be fun though to repost Episode 1 and hear where the podcast started.  Hopefully, you hear a change in the audio quality since then.  We've learned a lot along the way.  Hope everyone is having a great holiday week!  Enjoy!  
 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!  
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. 
 
This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.
 
 
Where Can You Find the Welding Tips and Tricks Forum?
 
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram
 
 
Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.
 
Where can you find a Tig Finger?
 
You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.
 
 
This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!
Aug 31, 2020

Thank you for listening to episode 208 of the Welding Tips and Tricks Podcast!  For this week's conversation we take a stab at answering a question we get very often.  What should I buy for my first mobile setup?  This is a very deep subject and also very personal to every situation.  We hope this might answer a few of your questions and also gets you thinking about different options that might be available to you that you didn't think of to get you started!  Have a great week everyone and Enjoy!  

 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!  
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Brandon Parry, Scott Tasso, Anthony Chrisomalis, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.
 
 
Where Can You Find the Welding Tips and Tricks Forum?
 
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram
 
 
Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.
 
Where can you find a Tig Finger?
 
You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.
 
 
This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!
Aug 24, 2020

Thank you for listening to episode 207 of the Welding Tips and Tricks Podcast!  For this week's conversation we talk about how you handle a situation where you're being asked to do something that isn't right?  We've all had different things come up in our careers when a boss has asked us to do something or a job has gone sideways, what did we do in those situations?  We hope you never have those scenarios come up but if they do we hope this episode helps you.  Have a great week!  Enjoy!  

 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!  
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Brandon Parry, Eli Latin, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.
 
 
Where Can You Find the Welding Tips and Tricks Forum?
 
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram
 
 
Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.
 
Where can you find a Tig Finger?
 
You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.
 
 
This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!
Aug 17, 2020

Thank you for listening to episode 206 of the Welding Tips and Tricks Podcast!  For this week's topic we chat about taking Calculated Risks and Gambling within your business and careers.  We tried to be very broad and cover a lot of ground so it could apply to as many people possible.  We hope you're able to pull out some tips from this one to help you along your way.  Have a great week!  Enjoy  

 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!  
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Brandon Parry, Eli Latin, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.
 
 
Where Can You Find the Welding Tips and Tricks Forum?
 
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram
 
 
Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.
 
Where can you find a Tig Finger?
 
You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.
 
 
This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!
Aug 10, 2020
Thank you for listening to episode 205 of the Welding Tips and Tricks Podcast!  For this week's topic we asked @bezatesn, aka Nick Bezates, to join us and give us some insight on his experiences.  This topic is How to Organize Jobs.  If you're running your own company or side gig and things are starting to fill up what are some of the things you need to do to keep everyone happy and keep the work flowing?  This is what this week's talk is about along with a few other turns.  We hope you enjoy this one and are able to pull out a few good nuggets of information!  Have a great week!  
 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!  
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Brandon Parry, Eli Latin, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.
 
Where can you find Nick?
 
On Instagram @Bezatesn  
 
Where Can You Find the Welding Tips and Tricks Forum?
 
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram
 
 
Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.
 
Where can you find a Tig Finger?
 
You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.
 
 
This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!
Aug 3, 2020
Thank you for listening to episode 204 of the Welding Tips and Tricks Podcast!  For this week's episode we thought it would be interesting to talk about, what does a welder do?  Jody was looking up some tag words online and this question came up a few times so it is something that is searched often and we thought it might be a good topic for someone getting into the trade!  Hope everyone has a great week!  Enjoy!  
 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!  
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Brandon Parry, Eli Latin, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.
  
Where Can You Find the Welding Tips and Tricks Forum?
 
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram
 
 
Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.
 
Where can you find a Tig Finger?
 
You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.
 
 
This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!
Jul 27, 2020
Thank you for listening to episode 203 of the Welding Tips and Tricks Podcast!  For this week's conversation we had a fun chat with the one and only @winchestermetalworks, aka Mark Winchester.  If you're wanting to up your aluminum welding game Mark is your guy!  We talked about how Mark got into welding and the path that lead him to his solid knowledge base!  We hope you're able to pick up a few of the great tips laid out in this episode and they help you take you to the next level!  Have a great week everyone! 
 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!  
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Brandon Parry, Eli Latin, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.
 
Where can you find Mark?
 
On the Web at  winchestermetalworks.com
On Instagram @winchestermetalworks
 
Where Can You Find the Welding Tips and Tricks Forum?
 
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram
 
 
Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.
 
Where can you find a Tig Finger?
 
You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.
 
 
This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!
Jul 20, 2020

Thank you for listening to episode 202 of the Welding Tips and Tricks Podcast!  For this week's guest we have a revisit with @Deepsouthdimestacker, aka Brad Goodman.  We talked with Brad on episode 171 and wanted to catch up with him to see how things have changed in his business and skill set.  If you haven't listened to ep 171 be sure to give that a listen first!  Thank you to all of you that support the podcast with your listens!  It means a lot to us!  Enjoy

 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!  
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Brandon Parry, Eli Latin, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.
 
Where can you find Brad?
 
On Instagram @deepsouthdimestacker 
 
Where Can You Find the Welding Tips and Tricks Forum?
 
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram
 
 
Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.
 
Where can you find a Tig Finger?
 
You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.
 
 
This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!
Jul 13, 2020

Thank you for listening to Episode 201 of the Welding Tips and Tricks Podcast!  For this week's topic we talk about something that we all never want to deal with... When a job goes bad...  What have we done in the past and we hope this episode will help you if you find yourself in that scenario.  

 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!  
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Brandon Parry, Eli Latin, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.
 
 
Where Can You Find the Welding Tips and Tricks Forum?
 
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram
 
 
Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.
 
Where can you find a Tig Finger?
 
You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.
 
 
This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!
Jul 6, 2020

Thank you for listening to episode 200 of the Welding Tips and Tricks Podcast!  It has been a wild ride these past 200 episodes and we were not really sure what direction to take this episode.  With Jonathan just moving his family and business across the country we thought we'd go down the road with what was that like and what are some of the details that went into this big move.  If you're looking at moving to a new location you'll want to take some good notes!  Thank you to all of you that listen each week.  Without your support listening we would not have a podcast!  We enjoy doing this but it means the world to us that it is helping you in some way!  

 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!  
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Brandon Parry, Eli Latin, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.
 
 
Where Can You Find the Welding Tips and Tricks Forum?
 
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram
 
 
Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.
 
Where can you find a Tig Finger?
 
You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.
 
 
This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 
Jun 22, 2020

Thank you for listening to episode 199 of the Welding Tips and Tricks Podcast!  For this week's guests we have Scott Peart and Alex Warner from Sunstone Welders on to talk about the interesting products they provide our community.  When you first hear Micro Welding you probably think only super niche markets need such things but after this conversation with Scott and Alex it really opened our eyes to the possibilities of these machines in every job shop!  We hope you have that same Ah Ha moment while listening to this episode too!  Enjoy! 

 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!  
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Brandon Parry, Eli Latin, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.
 
Where can you get a hold of Sunstone Welders?
 
On Instagram @Suntstoneweld
On the phone at 1-801-658-0015
 
Where Can You Find the Welding Tips and Tricks Forum?
 
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram
 
 
Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.
 
Where can you find a Tig Finger?
 
You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.
 
 
This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 
 
Jun 15, 2020
Thank you for listening to episode 198 of the Welding Tips and Tricks Podcast.  For this week's guest we had a fun conversation with Art Kleppen the founder of CK Worldwide.  It was really interesting hearing how a brand that we all use and enjoy came to life.  Also, learned of something new coming out that you can personally get your hands on just from listening to this episode!  We hope you enjoy this week's conversation and have a great week!
 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!  
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Brandon Parry, Eli Latin, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.
 
How do you get your own CK EZ Dabr?
 
Email Help@ckworldwide.com and be sure to tell them you heard it here on the Welding Tips and Tricks Podcast!  
 
Also, be sure to checkout www.CKWorldwide.com  to see all the great products they offer our community!  
 
Where Can You Find the Welding Tips and Tricks Forum?
 
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram
 
 
Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.
 
Where can you find a Tig Finger?
 
You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.
 
 
This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 
Jun 8, 2020

Thank you for listening to episode 197 of the Welding Tips and Tricks Podcast! For this show we thought it would be a little different for us to just have a Chat. Kind of like the After Show. We didn't have a topic and all could use a little time to just talk and see what came up. We hope this episode is just what you needed too. Nothing too crazy just general conversation about life and welding. We hope you enjoy this different episode and everyone a great week!   

 
If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!  
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Brandon Parry, Eli Latin, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.
 
 
Where Can You Find the Welding Tips and Tricks Forum?
 
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram
 
 
Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.
 
Where can you find a Tig Finger?
 
You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.
 
 
This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 
 
Jun 1, 2020

Thank you for listening to episode 196 of the Welding Tips and Tricks Podcast!  For this week's guest and chat we catch up with @ddemoise, aka David Demoise.  We had David on a little while ago but since then a few things have changed for his company.  We talk about how those changes are going for him along with much more!  Hope you enjoy this episode and helps grow that fire to start your own company!  

If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!  
 
Welding Tips and Tricks Podcast Patreon Page 
 
We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Brandon Parry, Eli Latin, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.
 
Where can you find David?
On Instagram @DDemoise
 
Where Can You Find the Welding Tips and Tricks Forum?
 
 
Where can you find Us?
 
You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.  
 
We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.
 
 
Give us a Call
 
You can also now call and leave us a voicemail!  
(915)308-7024
 
 
How to reach us individually 
 
 
Jody Collier           http://www.weldingtipsandtricks.com/
                             Welding Tips and Tricks on Youtube
                             @Weldmonger on Instagram
                   
                             @Superiorwelding on Instagram
                             Superiorwelding on Youtube
                        
Roy Crumrine        http://www.crummywelding.com/
                             @CrummyWelding on Instagram
 
 
Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.
 
Where can you find a Tig Finger?
 
You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.
 
 
This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 
1 2 3 Next »